Estate Swing Manual de instrucciones Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 48
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
Wiring the Operator Arm(s)
Attaching Arm Cover
1. Fit the bottom cover with the supplied cable gland.
2. Run the 5 Conductor wire through the cable gland and tighten the cable gland to squeeze
the wire.
3. After attaching the wire according to the picture below and the chart on the following
page, cover the operator arm terminal board with
3.4
Use the following page in conjunction with this picture to
correctly wire your arm(s).
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Comentarios a estos manuales

Sin comentarios