Estate Swing Manual de instrucciones descargar pdf (Pagina 40)

5. When the closing stop point or limit switch is reached, the motor pauses for approximately 2

seconds, and then restarts with a total opening maneuver to the opening stop point or limit

switch.

6. When the full open stop or limit switch is reached the gate(s) will stop.

7. Wait for the amount of time you would like your gate(s) to pause for (up to 4 minutes) during

normal operation before automatically re-closing and then signal your opener using an OPEN A

contact or transmitter signal to close the gate(s). The gate(s) will then return to closed and pro-

gramming will be complete.

Even if your auto close is off you must still set a pause time, the pause time

will not be used in normal gate operation.

4.5

Dual gates are programmed

simultaneously. Move both

of the leafs to the same

starting position and both

leafs will move together

through the same

programming sequence.

There is a slight starting

delay on the slave side.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Sin comentarios

Estate Swing Manual de instrucciones Pagina 40