Estate Swing Manual de instrucciones descargar pdf (Pagina 18)

E-S 1000D Series Instruction Manual

Installation of Operator—Pull-to-Open

2.7

Before permanently attaching any brackets, be sure to test arm motion

and clearance.

13) WITH THE GATE IN THE CLOSED POSITION

measure 44” from the center of the hole on

the boomerang bracket to the center of

the hole on the gate bracket - this should

be the position of the gate bracket on the

closed gate. [See Fig. 7]

14) Additionally measure and mark the

gate mounting bracket so that it is vertically

centered on the horizontal bar.

15) To ensure that the gate mounting brack-

et is leveled, secure one side of the bracket,

check for levelness, and secure the other

side with provided carriage bolts, nuts, and

washers. [See Fig. 8]

Fig 7

Fig 8

44”

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 56 57

Sin comentarios

Estate Swing Manual de instrucciones Pagina 18