Estate Swing Manual de instrucciones descargar pdf (Pagina 41)

E-S 1000D Series Instruction Manual

433 Plug-in Receiver

4.4

1. With the red plug already inside the control box,

run the grey receiver wire out of the box through one

of the water tight connections.

2. Find a location for the receiver box on the gate

post or a fence post that is within the length of the

receiver wire.

3. Using a #6 screw attached the top of the receiver

to the post. If you are happy with this position use the

small provided set screw in the bottom hole to se-

cure the receiver in place.

4. Attach the receiver wire to the terminals as seen

below. Please note that you will find a factory in-

stalled jumper wire connected on the receiver.

Leave this jumper wire in place. One of the terminals

that has the jumper wire will have the White wire add-

ed to the terminal.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 56 57

Sin comentarios

Estate Swing Manual de instrucciones Pagina 41