Estate Swing Manual de instrucciones descargar pdf (Pagina 38)

E-S 1000D Series Instruction Manual

First Run

4.1

This is our recommended procedure to run the gate for the first time.

PUSH 1 or PUSH 2 to increase or decrease the parameter. Then press SET button to move to

the next parameter.

1. Press SET button to begin.

2. LED shows P1: Press Push 1 to get P1 setting to 30.

3. Press SET button.

4. LED shows P2: Press Push 1 to get P2 setting to 10.

5. Press SET button.

6. LED shows P3: Press Push 1 to get P3 setting to 30.

7. Press SET button.

8. LED shows P4: Press Push 1 to get P4 setting to 3.

9. Press SET button.

10. LED shows P5: Press Push 1 to get P5 setting to 2.

11. Press SET button.

12. LED shows P6: Press Push 1 to get P6 setting to 10.

13. Press SET to finish. You should hear 3 beeps; this indicates parameter programming is fin-

ished.

Make sure the first switch is

turned off (down)

Manually detach the end of the gate opener, then turn shaft

repeatedly until it reaches the gate bracket with the gate in

the halfway position. Re-attach gate opener to the gate

bracket. Activate using Push 1 button (as shown above) The

gate should run open. Press Push 1 again and it should run

closed.

The gate is now set up for regular use.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 56 57

Sin comentarios

Estate Swing Manual de instrucciones Pagina 38